Please do not hesitate to call our Customer Care department at (800) 948 7133 if your keypad is not shown or if you have any problems setting your date and time.

GE S1/R2 system

To set the System Time:

  • Enter the programming menus by pressing 9 + System Master Code.
  • Press 020
  • Enter the correct time in 24-hour format, military time (for example: 17:00 for 5:00 PM or 08:15 for 8:15 AM), then press #.
  • Press *+ 00 + # to exit the programming menus.

If your master code was 1110, you would enter 9, 1110, 020, 1700, #, *00#
to change the time to 5:00 PM.

To set the System Date

  • Enter the programming menus by pressing 9 +┬áSystem Master Code.
  • Press 021
  • Enter the current date as 6 digits (mm/dd/yy), then press #.
  • Press * + 00 + # to exit the programming menus.

DSC

Please go to your keypad

  • Press *, 6
  • Enter your 4 digit master code
  • Press 1
  • Type in your time military format (for example: 1:15pm- is entered as 1315)
  • Type in the date beginning with the month (for example April 12, 2006 is entered as 041206)
  • Finally, press the # key 3 times.

**The time will take approximately one minute to update. Please be patient. **

AT&T 8345

Please go to your keypad

  • Press the Next key
  • Then Press the Select key
  • Enter your 4-digit master code
  • Press the Next key 3 times
  • Press the Select key 2 times
  • Enter the hour in 2-digit format (for example: 1:00 PM is entered as 01)
  • Then press the Select key
  • Enter your minutes in 2-digit format (for example: 8 minutes is entered as 08)
  • Then pres the Select key
  • Press the Next key to select AM or PM. Once the desire mode is flashing press the Select key.
  • Press the Next key
  • Then the Select key
  • Then enter the year in 4-digit format (for example: 2006)
  • Then press the Select key
  • Enter the month in 2-digit format (for example: April is entered as 04)
  • Then press the Select key
  • Enter the day in 2-digit format (for example: the 12th is entered as 12)
  • Then press the Select key
  • Press the Next key 3 times
  • Then press the Select key

APEX Advantage / Destiny

Please go to your keypad

  • Press the #2 & #8 keys at the same time until the keypad says enter the (4) digit time
  • Enter the time in 12hour format (for example: 3:00PM is entered as 0300)
  • The system will say enter (1) for AM or (2) for PM (Please select the correct mode)
  • The system will confirm the entered time
  • Enter the day of the week after the system prompts you:
    • For Sunday enter 1
    • For Monday enter 2
    • For Tuesday enter 3
    • For Wednesday enter 4
    • For Thursday enter 5
    • For Friday enter 6
    • For Saturday enter 7
  • The system will say enter the (2) digit month (ex. April is entered as 04)
  • The system will say enter the 2-digit year (ex. 2006 is entered as 06)

(Note: if an invalid entry is made, the system will speak “error” and wait for a valid entry.)